Silvereye Certifications Logo
HomeContactGet Free Consultation

BIS Certification for Insect Killers in India: Process, Documents & Requirements (2026)

BIS Certification for insect killers
  • Insect Killers are listed at Sl. No. 13 of the Table under the Safety of Household, Commercial and Similar Electrical Appliances (QCO) Order, 2026.
  • ISI Mark certification under BIS Scheme-I is mandatory for covered products.
  • The QCO came into force on 1 October 2026 for general enterprises.
  • Small enterprises must comply from 1 January 2027.
  • Micro enterprises must comply from 1 April 2027.
  • The applicable Indian Standard is IS 302 (Part 1): 2024, aligned with IEC 60335-1:2020.

Introduction

BIS Certification for Insect Killers is mandatory for manufacturers selling covered products in the Indian market. As per S.O. 1739(E), dated 6 April 2026, insect killers listed under Sl. No. 13 must comply with IS 302 (Part 1): 2024 and obtain a BIS licence to use the ISI Mark under Scheme-I.

BIS Logo

The compliance deadline is 1 October 2026 for general enterprises, 1 January 2027 for small enterprises and 1 April 2027 for micro enterprises. However, products manufactured exclusively for export are exempt from this requirement.

What Is BIS Certification for Insect Killers?

BIS Certification for Insect Killers is a product safety certification issued by the Bureau of Indian Standards (BIS). It confirms that covered insect-killing appliances comply with the applicable Indian Standard and have received a BIS license to use the ISI Mark.

The certification helps ensure that insect killers meet essential electrical safety requirements, including protection against electric shock, excessive heating, fire and mechanical hazards. These requirements are particularly important for appliances such as electric bug zappers and insect killer lamps that use high-voltage grids.

ISI Logo

The 2026 QCO lists IS 302 (Part 1): 2024, aligned with IEC 60335-1:2020, as the applicable Indian Standard. Depending on the appliance type, BIS may also require compliance with relevant particular requirements. Therefore, manufacturers should confirm the applicable testing scope for each product model before submitting an application.

What Has Changed? The 2026 QCO at a Glance

On 6 April 2026, the Department for Promotion of Industry and Internal Trade (DPIIT), under the Ministry of Commerce and Industry, issued the Safety of Household, Commercial and Similar Electrical Appliances (Quality Control) Order, 2026. It supersedes the 2025 Order, except for actions already taken or omitted before the supersession.

The key provisions applicable to insect killer manufacturers, importers and brand owners are:

  • Product coverage: The Order covers electrical appliances designed for household, commercial or similar use, with a rated voltage not exceeding 250 V for single-phase appliances and 480 V for other appliances. This includes DC-supplied and battery-operated appliances.
  • Product listing: Insect Killers are specifically listed at Sl. No. 13 of the Table under the QCO.
  • Mandatory ISI Mark: Covered products must conform to the applicable Indian Standard and carry the Standard Mark (ISI Mark) under a BIS licence through Scheme-I of Schedule-II of the BIS (Conformity Assessment) Regulations, 2018.
  • Certifying authority: The Bureau of Indian Standards (BIS) is responsible for certification and enforcement of the Order.
  • Penalty for non-compliance: Violations of the Order may attract penalties under the Bureau of Indian Standards Act, 2016.
  • Latest standard requirement: The latest applicable version of the Indian Standard must be followed.
  • Overlap with other QCOs: The Order does not apply to appliances covered under another Quality Control Order issued under the BIS Act or notified for mandatory BIS certification under another Act.

Implementation Dates

Category of manufacturerImplementation date
General enterprises (other than micro and small enterprises)1 October 2026
Small enterprises (under the MSMED Act, 2006)1 January 2027
Micro enterprises (under the MSMED Act, 2006)1 April 2027

Exemptions and Relief Under the Order

The 2026 QCO provides certain exemptions and transitional relief for eligible manufacturers and importers:

  • Export-only products: Products manufactured in India exclusively for export are exempt from the requirements of this Order.
  • Research and Development (R&D) imports: Manufacturers of household and similar electrical appliances may import up to 200 units per year for research and development purposes. These products cannot be sold commercially and may be disposed of as scrap. Manufacturers must maintain annual records and provide them to the Central Government when requested.
  • Existing stock: Products manufactured in India or imported before the applicable implementation date by a BIS-certified manufacturer or a manufacturer that has applied for BIS certification may be sold, displayed or offered for sale for up to six months from the implementation date, subject to the prescribed conditions and submission of a declaration to BIS.

Practical Note (as of 30 October 2026): The general implementation date of 1 October 2026 has already passed. Eligible manufacturers that have submitted the required stock declaration may use the transitional period until 1 April 2027. Small and micro enterprises have later compliance deadlines. However, manufacturers should begin the BIS certification process early to avoid delays.

Which Products Are Covered Under BIS Certification for Insect Killers?

The 2026 QCO lists Insect Killers as a product category but does not provide a detailed definition. Depending on their electrical design and intended use, the following products may fall within this category.

Product TypeApplicability Under the QCO
Electric bug zapper or insect killer lamp with UV light and an electric gridLikely covered under Sl. No. 13. Confirm applicability for each model.
Electric mosquito racket or swatter (mains-powered or rechargeable)May fall within the category, subject to confirmation of the product classification and testing requirements.
Plug-in or tabletop insect trap with a fan or glue boardCheck whether the electrical appliance is covered under Sl. No. 13.
Mosquito repellent vaporizer or liquid heaterListed separately as Vaporizers at Sl. No. 75. It should not automatically be classified as an insect killer.
Non-electrical insect traps, sprays and mosquito coilsOutside the scope of this electrical appliance QCO.

Note: Product classification should be confirmed with reference to the applicable Indian Standard and BIS requirements before applying for certification.

Who Needs BIS Certification for Insect Killers?

BIS certification applies to manufacturers and other businesses involved in supplying covered insect killers in the Indian market.

  • Indian manufacturers: Businesses manufacturing insect killers for sale in the domestic market must obtain the applicable BIS licence.
  • Importers: Businesses importing electric bug zappers, mosquito rackets or insect killer lamps must ensure that the products meet the applicable BIS requirements. Foreign manufacturers generally apply through the Foreign Manufacturers Certification Scheme (FMCS) and appoint an Authorized Indian Representative (AIR).
  • Brand owners and private-label sellers: Businesses selling insect killers under their own brand through third-party manufacturers must coordinate with the actual manufacturing facility to ensure valid BIS certification.
  • Online sellers and distributors: Sellers should verify that covered products carry a valid ISI Mark and the corresponding BIS licence details.
  • Commercial and hospitality businesses: Businesses purchasing insect killers for commercial applications, such as restaurants, cafes and hotels, should ensure that the products comply with applicable requirements.

Products generally outside this requirement: Insect killers manufactured exclusively in India for export and products covered under another applicable QCO or mandatory BIS certification notification.

Benefits of BIS Certification for Insect Killers

Obtaining BIS certification offers several benefits to manufacturers, importers and brand owners:

  • Legal compliance: Helps businesses meet the mandatory requirements of the 2026 QCO before manufacturing, importing or selling covered products in India.
  • Market acceptance: A valid BIS license and ISI Mark help meet compliance expectations of retailers, distributors and online marketplaces.
  • Customer confidence: The ISI Mark provides assurance that the product has undergone the applicable conformity assessment process.
  • Reduced enforcement risk: Compliance helps businesses avoid potential regulatory action and penalties under the BIS Act, 2016.
  • Improved manufacturing quality: BIS certification encourages regular product testing, quality control, production monitoring and proper documentation.

BIS Certification Requirements for Insect Killers

To obtain BIS Certification for Insect Killers, manufacturers must meet the applicable product safety, testing and factory assessment requirements under Scheme-I.

The key requirements include:

  • Product Standard Compliance: The insect killer must conform to IS 302 (Part 1): 2024 and any applicable particular requirements.
  • BIS Licence: Manufacturers must obtain a valid BIS licence under Scheme-I, which involves product testing and factory assessment.
  • Laboratory Testing: Product samples must be tested at a BIS-recognised laboratory to verify compliance with the applicable safety requirements.
  • In-house Testing Facilities: The manufacturing facility must maintain the required testing equipment, quality control procedures and testing arrangements as specified by BIS.
  • ISI Marking: Every covered product must carry the ISI Mark and corresponding BIS licence number in accordance with the licence conditions.
  • Foreign Manufacturer Requirements: Overseas manufacturers must appoint an Authorised Indian Representative (AIR) and follow the Foreign Manufacturers Certification Scheme (FMCS) requirements.

Eligibility for BIS Certification of Insect Killers

Manufacturers must fulfil the applicable eligibility conditions before applying for BIS certification.

  • Indian and Foreign Manufacturers: Any manufacturer producing insect killers covered under the QCO can apply, provided the product falls within the applicable scope and voltage limits.
  • Manufacturing Facility: The applicant must have an operational manufacturing unit with the required production equipment, testing facilities and quality management arrangements.
  • Product Compliance: The insect killer must meet the applicable requirements of IS 302 (Part 1): 2024.
  • Micro and Small Enterprises: Eligible micro and small enterprises can follow their respective extended implementation dates, provided they meet the classification criteria under the MSMED Act, 2006.

Documents Required for BIS Certification of Insect Killers

Manufacturers must submit the required technical, business and factory-related documents through the BIS application process. The exact document list may vary depending on the product and applicant category.

Commonly required documents include:

  • BIS application form submitted through the official BIS online portal.
  • Company registration documents, such as incorporation certificate or firm registration proof.
  • GST registration certificate and PAN card of the applicant.
  • Factory address proof and details of the manufacturing facility.
  • Product model list, technical specifications and product details.
  • Circuit diagrams and Bill of Materials (BOM), including details of critical components such as electric grids, transformers, charging circuits and batteries, wherever applicable.
  • Product test report issued by a BIS-recognised laboratory.
  • Testing equipment details and information about the in-house laboratory facility.
  • Quality control plan or manufacturing process flow chart.
  • Brand ownership proof or authorisation letter, wherever applicable.
  • Udyam Registration Certificate for micro and small enterprises claiming the extended implementation dates.
  • AIR authorisation and manufacturer details for foreign manufacturers applying under FMCS.
Documents Required For BIS ISI Certification

BIS Certification Process for Insect Killers (Scheme-I)

Manufacturers must follow the BIS Scheme-I certification procedure to obtain a license for using the ISI Mark on covered insect killers.

  1. Check Product Applicability: Identify whether the product falls under Sl. No. 13 of the QCO and verify the applicable voltage limits and Indian Standard.
  2. Review Product Design and Components: Check the product design, insulation, electrical clearances, grid protection, battery and charging components against the applicable safety requirements before submitting samples.
  3. Submit the BIS Application: Complete the application through the official BIS portal and upload the required business, technical and manufacturing documents along with the applicable fees.
  4. Product Testing: Submit product samples to a BIS-recognized laboratory for testing against the applicable Indian Standard.
  5. Factory Inspection: BIS officials assess the manufacturing facility, production process, quality control system and in-house testing arrangements.
  6. Resolve BIS Queries: Address any observations or deficiencies raised by BIS regarding documents, laboratory test reports or factory inspection findings.
  7. Grant of BIS License: After successful completion of the required assessment, BIS grants the license authorizing the manufacturer to use the ISI Mark on the approved products.
  8. ISI Marking and Ongoing Compliance: Manufacturers must mark their products according to the license conditions and continue meeting BIS testing, surveillance and quality control requirements.
Process for BIS ISI Certification

For foreign manufacturers: The certification process follows the FMCS procedure, including the appointment of an Authorized Indian Representative (AIR). The license is associated with the approved foreign manufacturing facility.

Fees for BIS Certification of Insect Killers

The total cost of BIS Certification for Insect Killers depends on factors such as the number of product models, laboratory testing requirements, factory inspection and applicable BIS charges.

The following table provides an overview of the main fee components:

Fee ComponentWhat It Covers
Application FeeSubmission and processing of the BIS licence application.
Licence or Annual FeeCharges for obtaining and maintaining the BIS licence.
Marking FeeApplicable charges for using the ISI Mark on certified products.
Product Testing FeeLaboratory testing of insect killers against the applicable Indian Standard.
Inspection and Travel CostsExpenses associated with factory assessment and inspection, including additional costs for foreign manufacturing facilities.
Consultancy or AIR FeeProfessional assistance with documentation, application coordination and AIR-related services, where required.

Manufacturers should confirm the latest applicable charges with BIS and the selected recognised laboratory before preparing their certification budget.

Validity and Renewal of BIS Certification

A BIS license under Scheme-I is granted for a specified validity period and must be renewed according to the applicable BIS requirements. Manufacturers should monitor the license expiry date and complete the renewal process on time.

AspectDetails
Initial ValidityThe licence is granted for the validity period specified by BIS.
RenewalManufacturers must apply for renewal through the BIS portal before the license expires.
Renewal AssessmentBIS may review test reports, surveillance results, marking compliance, fee payments and complaints, as applicable.
Failure to RenewUsing the ISI Mark or selling covered products without a valid licence can lead to non-compliance with the QCO.
Changes During ValidityChanges in product models, manufacturing facilities, brand details or applicable standards may require a licence amendment or additional testing.

Important: The QCO specifies that the latest applicable version of the Indian Standard must be followed. Therefore, manufacturers should monitor standard revisions and comply with any updated BIS testing or certification requirements.

Timeline for BIS Certification of Insect Killers

The time required to obtain BIS certification depends on the completeness of the application, product testing, factory inspection and resolution of BIS queries.

In general, manufacturers should plan for several weeks to a few months to complete the certification process. Applications involving multiple models, testing issues or foreign manufacturing facilities may require additional time.

Starting the application process early helps manufacturers complete the required formalities before their applicable QCO implementation deadline.

Common Mistakes to Avoid During BIS Certification

Manufacturers and importers should avoid the following mistakes when applying for BIS Certification for Insect Killers:

  • Assuming CE Certification Is Enough: CE or other international certifications do not replace the mandatory BIS licence under the Indian QCO.
  • Applying Too Late: Delaying the application can create difficulties in completing product testing and factory inspection before the applicable deadline.
  • Incorrect Applicant Details: Differences between manufacturer, brand owner, importer and factory details can delay the application.
  • Ignoring Stock Declaration Requirements: Eligible manufacturers must follow the prescribed declaration procedure to claim the transitional relief for existing stock.
  • Incorrect Product Classification: Mosquito vaporizers and insect killers have separate entries in the QCO. Manufacturers should verify the correct classification before applying.
  • Unapproved Product Changes: Changes to the electric grid, charger, battery or other critical components after testing may require BIS assessment or additional testing.

Why Choose Silvereye Certifications for BIS Certification of Insect Killers?

Silvereye Certifications is an Indian regulatory consultancy providing support for BIS, CDSCO, cosmetic registration and other regulatory compliance requirements. We assist manufacturers, importers and brand owners in understanding and managing the certification process for regulated products.

For BIS Certification for Insect Killers, our team can help with:

  • Product Applicability Assessment: Identify the applicable QCO entry, product requirements and implementation deadline.
  • Documentation Support: Prepare and review the technical, business and manufacturing documents required for the BIS application.
  • Testing Coordination: Assist with coordinating product testing through the applicable recognised laboratory.
  • BIS Application Support: Help with application preparation, submission and responses to BIS queries.
  • Renewal and Amendment Guidance: Support manufacturers in planning licence renewals and managing applicable amendments.
  • Existing Stock Guidance: Assist eligible businesses with understanding the stock declaration requirements under the QCO.

We focus on practical guidance, transparent communication and timely support to help businesses manage their BIS certification requirements with greater confidence.

Conclusion

BIS Certification for Insect Killers is an important compliance requirement under the 2026 QCO for manufacturers and importers supplying covered products in the Indian market. The general implementation date of 1 October 2026 has passed, while small enterprises must comply by 1 January 2027 and micro enterprises by 1 April 2027.

Businesses should identify the correct QCO entry for each product model, verify compliance with the applicable Indian Standard, prepare the required documents, complete product testing and obtain a valid BIS license before selling covered products. Manufacturers holding eligible existing stock or planning imports should also ensure that they follow the applicable QCO conditions and deadlines.

Silvereye Certifications can assist manufacturers, importers and brand owners with product applicability checks, documentation, testing coordination and BIS application support to help them manage the certification process smoothly.

Frequently Asked Questions

Is BIS certification mandatory for insect killers in India?

Yes. Insect Killers are listed at Sl. No. 13 of the Table in the QCO Order of 6 April 2026, so they must conform to the notified standard and carry the ISI Mark.

 Which Indian Standard applies for insect killers?

IS 302 (Part 1): 2024, aligned with IEC 60335-1: 2020. The latest version of the standard applies.

 From when is it mandatory?

From 1 October 2026 for general manufacturers, 1 January 2027 for small enterprises and 1 April 2027 for micro enterprises.

Is BIS needed for an electric mosquito racket?

Electric mosquito rackets are commonly sold as insect killers, and the Order's scope includes battery-operated appliances within the voltage limits. Confirm the entry and test scope for your model with BIS or a consultant.

Do mosquito repellent vaporizers fall under this entry?

The Table has a separate entry for Vaporizers (Sl. No. 75). Check which entry and standard apply before applying.

Can I import insect killers without BIS certification?

Not for sale in India, unless an exemption applies. The Order allows up to 200 units per year for R&D by appliance manufacturers, and they cannot be sold commercially.

Are insect killers made for export covered?

No. Goods manufactured domestically for export are exempt.

Can I sell old stock after the deadline?

Goods made or imported before the implementation date by a BIS-certified manufacturer, or one who has applied for certification, can be sold for up to six months from that date if a declaration is made to BIS.

What is the penalty for selling without BIS certification?

Contravention is punishable under the Bureau of Indian Standards Act, 2016.

Do foreign manufacturers need an Indian representative?

Generally yes. They apply through FMCS and appoint an Authorized Indian Representative.

Jyoti Sharma

Jyoti Sharma

Jyoti Sharma is a Digital Marketing Executive at Silvereye Certifications with expertise in SEO, WordPress, AI tools, and certification & compliance industry marketing solutions.

More About Our Company

Client Satisfy into Success Stories