- Notification Date: S.O. 6010(E) was issued on 4 November 2026 and came into force from the date of its publication in the Official Gazette.
- New Implementation Date: The Textiles — Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement (Quality Control) Order, 2023 will now come into force on 6 January 2027.
- Scope of Amendment: The notification changes only paragraph 1, sub-paragraph (2) of the original 2023 Order.
- Previous Amendments: The notification also lists seven earlier amendments made to the same Quality Control Order.
Introduction
The Cement Bag QCO 6 January 2027 Update was introduced through S.O. 6010(E), dated 4 November 2026, issued by the Ministry of Chemicals and Fertilizers. The notification amends the Textiles — Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement (Quality Control) Order, 2023.

Under this amendment, paragraph 1(2) of the original Order has been replaced, specifying 6 January 2027 as the new implementation date. The amendment itself came into force on 4 November 2026, the date of its publication in the Official Gazette.
What Is the Cement Bag QCO Update?
S.O. 6010(E) is a notification issued by the Central Government through the Ministry of Chemicals and Fertilizers, Department of Chemicals and Petrochemicals. It has been issued under the powers conferred by Section 16, read with Section 17 and Sub-section (3) of Section 25 of the Bureau of Indian Standards Act, 2016. The Government states that the amendment is necessary in the public interest and that it was issued after consulting the Bureau of Indian Standards (BIS).

In simple terms, the amendment changes the implementation date of the Textiles — Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement (Quality Control) Order, 2023. Under the revised provision, the Order will now come into force on 6 January 2027.
Notification Details
| Item | Detail |
|---|---|
| Notification Number | S.O. 6010(E) |
| Order Amended | Textiles — Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement (Quality Control) Order, 2023 |
| Short Title (English Text) | Textiles — Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement (Quality Control) Third Amendment Order, 2026 |
| Date | 4 November 2026 |
| Issued By | Ministry of Chemicals and Fertilizers, Department of Chemicals and Petrochemicals |
| Commencement of Amendment | Date of publication in the Official Gazette |
| Gazette Number | No. 5778, Extraordinary, Part II, Section 3(ii) |
| File Number | PC-II-25014/9/2019-TECH.-CPC |
| Signed By | Dr. G. Venkatesh, Joint Secretary |

Notification History of the QCO
The original cement bag Quality Control Order was notified in December 2023 and has undergone several amendments. The notification history is provided below:
| Notification | Date |
|---|---|
| S.O. 5179(E) (Principal Order) | 6 December 2023 |
| S.O. 2182(E) | 4 June 2024 |
| S.O. 3939(E) | 13 September 2024 |
| S.O. 5262(E) | 6 December 2024 |
| S.O. 2552(E) | 11 June 2025 |
| S.O. 4067(E) | 4 September 2025 |
| S.O. 52(E) | 5 January 2026 |
| S.O. 5479(E) | 6 October 2026 |
| S.O. 6010(E) (Latest Update) | 4 November 2026 |
What Exactly Has Changed? Clause-by-Clause Explanation
The Third Amendment Order, 2026 introduces a change to the commencement date of the original 2023 Quality Control Order.
Clause 1: Short Title and Commencement
The notification is officially called the Textiles — Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement (Quality Control) Third Amendment Order, 2026. It came into force on 4 November 2026, the date of its publication in the Official Gazette.
Clause 2: Change in the Implementation Date
Under this clause, sub-paragraph (2) of paragraph 1 of the original 2023 Order has been replaced. The revised provision states that the Order shall come into force on the 6th day of January 2027.
The amendment changes the implementation date without introducing any other changes to the original provision.
| Particular | Details |
|---|---|
| Amendment Effective Date | 4 November 2026 |
| New QCO Implementation Date | 6 January 2027 |
| Provision Amended | Paragraph 1, Sub-paragraph (2) |
Who Is Affected? Eligibility Guide
The Order applies to PP woven, laminated, block bottom valve sacks used for packaging 50 kg of cement. The following stakeholders may be affected by the revised implementation date:
- Sack Manufacturers: Manufacturers producing polypropylene woven, laminated, block bottom valve sacks for 50 kg cement packaging.
- Cement Manufacturers: Cement companies purchasing and using these sacks for packaging and distribution.
- Importers: Businesses importing the covered PP woven valve sacks into India.
- Packaging Suppliers and Traders: Businesses involved in supplying, distributing or trading these packaging products.
Important: The Third Amendment does not provide detailed product specifications, Indian Standard requirements or exemptions. For the complete product scope and applicable compliance requirements, businesses should refer to the principal Order (S.O. 5179(E)) and its subsequent amendments.

Benefits of Knowing the New QCO Implementation Date
Understanding the revised implementation date helps manufacturers, importers and other stakeholders prepare for the upcoming compliance requirements.
- Clear Implementation Deadline: The amendment establishes 6 January 2027 as the new date for the 2023 QCO to come into force.
- Time for Compliance Preparation: The notification was issued on 4 November 2026, giving affected businesses time to review their compliance arrangements before the revised implementation date.
- Better Business Planning: Manufacturers and importers can plan production, procurement, documentation and certification activities around the updated deadline.
- Regulatory Clarity: Reviewing the notification history helps businesses identify the latest amendment and understand which implementation date applies.
Requirements, Documents, Process, Fees and Validity: What Does the Order Say?
The Third Amendment Order, 2026 (S.O. 6010(E)) only changes the commencement date of the original 2023 Quality Control Order. It does not introduce or specify any new technical requirements, documentation, application procedures, fees or certification validity conditions.
| Topic | Position Under S.O. 6010(E) |
|---|---|
| Technical Requirements | Not specified in this amendment. |
| Documents Required | Not specified. |
| Application Process | Not specified. |
| Fees | No fees prescribed. |
| Validity and Renewal | Not specified. |
| New Commencement Date | 6 January 2027. |
BIS Certification Validity: An internal reference indicates a five-year validity period under an amendment to the BIS Conformity Assessment Regulations effective February 2026. However, this period is not mentioned in S.O. 6010(E). Manufacturers should verify the applicable validity requirements under the current BIS guidelines for this product before relying on this information.
For details about certification fees, application procedures and product requirements, manufacturers should refer to the official BIS portal and the principal 2023 QCO, along with its applicable amendments.
Practical Checklist for Stakeholders
Manufacturers, importers and cement companies should take the following steps to prepare for the revised QCO implementation date:
- Review the Principal Order: Read the original S.O. 5179(E) and all subsequent amendments to understand the applicable compliance requirements.
- Update Your Compliance Calendar: Note 6 January 2027 as the revised implementation date.
- Confirm Applicable Standards: Identify the relevant Indian Standard and BIS certification route for your product.
- Review Existing Stock and Supplier Contracts: Check your inventory, procurement arrangements and supplier agreements against the revised implementation date.
- Seek BIS Certification Guidance: Contact BIS or a qualified compliance consultant early if your product requires a BIS licence.
Common Mistakes to Avoid
Businesses should avoid the following mistakes when preparing for the revised cement bag QCO implementation date:
- Using an Outdated Deadline: Relying on the earlier implementation date instead of the revised date of 6 January 2027.
- Confusing Notification Dates: Treating 4 November 2026, the amendment's effective date, as the implementation date of the original QCO.
- Ignoring the Principal Order: Referring only to the short amendment instead of reviewing the original 2023 Order and its subsequent amendments.
- Delaying BIS Certification: Starting the certification process too late, which may create difficulties in completing the required compliance formalities before the implementation date.
Why Choose Silvereye Certifications?
Silvereye Certifications provides regulatory compliance consultancy services to manufacturers, importers and businesses dealing with Indian product certification requirements. Our team helps businesses understand applicable BIS regulations, Quality Control Orders and certification procedures.
For the Cement Bag QCO 2026 Update, we can assist businesses with:
- QCO Applicability Assessment: Understand whether your PP woven, laminated, block bottom valve sacks fall under the applicable Quality Control Order.
- BIS Certification Guidance: Identify the relevant Indian Standard and applicable BIS certification requirements.
- Documentation Support: Assist in preparing and reviewing the documents required for the certification process.
- Application Assistance: Provide guidance on BIS application procedures and certification formalities.
- Compliance Planning: Help manufacturers and importers prepare for the revised implementation date of 6 January 2027.
- Regulatory Updates: Keep businesses informed about relevant QCO amendments and changes in BIS requirements.
Our focus is on providing practical guidance, transparent communication and reliable compliance support to help businesses manage their certification requirements efficiently.
Conclusion
The Cement Bag QCO Third Amendment Order, 2026 (S.O. 6010(E)) revises the implementation date of the Textiles — Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement (Quality Control) Order, 2023. As per the notification dated 4 November 2026, the original Order will now come into force on 6 January 2027.
Since the amendment changes only the commencement date, manufacturers, cement companies and importers should review the original QCO and its subsequent amendments to understand the applicable product standards, BIS certification requirements and compliance procedures. Businesses should also begin their preparations early to avoid last-minute delays.
Silvereye Certifications can help manufacturers and importers understand the revised QCO, identify applicable BIS requirements and prepare for the upcoming compliance deadline.
Frequently Asked Questions
What is S.O. 6010(E)?
It is a 4 November 2026 notification amending the 2023 Quality Control Order for woven PP laminated block bottom valve sacks for 50 kg cement.
When does the cement bag QCO come into force?
On 6 January 2027, as per the substituted paragraph 1(2).
When did this amendment take effect?
On the date of its publication in the Gazette, 4 November 2026.
Which ministry issued it?
The Ministry of Chemicals and Fertilizers, Department of Chemicals and Petrochemicals.
What part of the Order changed?
Only paragraph 1, sub-paragraph (2).
Does the amendment list technical requirements?
No. It only changes the commencement date.
Is any fee mentioned?
No fee is mentioned.
Who signed the notification?
Dr. G. Venkatesh, Joint Secretary.
How many earlier notifications amended the Order?
The notification lists seven: S.O. 2182(E), 3939(E), 5262(E), 2552(E), 4067(E), 52(E) and 5479(E).
When was the principal Order published?
On 6 December 2023, as S.O. 5179(E).
Where can I read the original?
In The Gazette of India, Extraordinary, Part II, Section 3(ii), No. 5778, dated 4 November 2026 (CG-DL-E-04112026-277658).
Who can help me with BIS compliance?
A BIS consultant can review your product and licence route. See the next section.






































