Silvereye Certifications Logo
HomeContactGet Free Consultation

Furniture QCO Third Amendment 2026: BIS Import Exemption Dates, Documents and Compliance Guide

Furniture QCO Third Amendment BIS Import Exemption
  • The amendment came into force on 2 November 2026, the date of its publication in the Gazette.
  • The exemption is subject to three date-based conditions covering the Purchase Order, Bill of Lading and Bill of Entry.
  • Importers must submit the Purchase Order, Bill of Lading, Bill of Entry and supporting documents to BIS within seven days of customs clearance.
  • All supporting documents must be submitted on the importer's official letterhead and signed by its authorized signatory.

Introduction

The Furniture QCO Third Amendment Order, 2026 (S.O. 5950(E), dated 2 November 2026) introduces a conditional import exemption under the Furniture (Quality Control) Order, 2025. The exemption applies to imported goods if the Purchase Order was placed on or before 12 August 2026, the Bill of Lading is issued on or before 30 November 2026, and the Bill of Entry is issued on or before 31 December 2026.

BIS Logo

To claim this exemption, the importer must submit copies of these documents and the required supporting documents to BIS within seven days of customs clearance.

What Is the Furniture QCO Third Amendment 2026?

The Furniture (Quality Control) Third Amendment Order, 2026 is a notification issued by the Ministry of Commerce and Industry (Department for Promotion of Industry and Internal Trade). It was published in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (ii), as S.O. 5950(E) on 2 November 2026.

ISI Logo

The Central Government issued this amendment under the powers conferred by Section 16 of the Bureau of Indian Standards Act, 2016, after consulting the Bureau of Indian Standards (BIS). The notification states that the Government considers this measure necessary or expedient in the public interest.

In simple terms, the amendment changes one provision of the Furniture (Quality Control) Order, 2025. It replaces the seventh and eighth provisos of paragraph 2 with a single new proviso. This provision specifies the conditions under which certain furniture imports are exempt from the Order and the documents importers must submit to BIS.

Notification Details

ItemDetail
Notification NumberS.O. 5950(E)
Short TitleFurniture (Quality Control) Third Amendment Order, 2026
Date2 November 2026
Issued ByMinistry of Commerce and Industry, DPIIT
Legal AuthoritySection 16, Bureau of Indian Standards Act, 2016
CommencementFrom the date of publication in the Official Gazette
Gazette NumberNo. 5718, Extraordinary, Part II, Section 3(ii)
File NumberP-14031/99/2019-CI
Signed BySumeet Kumar Jarangal, Joint Secretary

Amendment History of the Furniture QCO

The Furniture (Quality Control) Order, 2025 has undergone several amendments. The notification history is as follows:

OrderNotificationDate
Principal Order (Furniture QCO 2025)S.O. 801(E)13 February 2025
First AmendmentS.O. 774(E)12 February 2026
Second AmendmentS.O. 1125(E)2 March 2026
Third Amendment (Latest Update)S.O. 5950(E)2 November 2026

What Exactly Has Changed? Clause-by-Clause Explanation

The Furniture QCO Third Amendment Order, 2026 introduces two main changes:

Clause 1: Short Title and Commencement

The amendment is officially called the Furniture (Quality Control) Third Amendment Order, 2026. It came into force on 2 November 2026, the date of its publication in the Official Gazette.

Clause 2: Replacement of the Existing Provisos

Under this clause, the seventh and eighth provisos of paragraph 2 of the Furniture (Quality Control) Order, 2025 have been replaced with a single new proviso.

According to the new provision, the Order will not apply to the import of goods or articles if all three of the following conditions are satisfied:

  1. Purchase Order: The purchase order must have been placed on or before 12 August 2026.
  2. Bill of Lading: The Bill of Lading must be issued on or before 30 November 2026.
  3. Bill of Entry: The Bill of Entry must be issued on or before 31 December 2026.

Reporting Condition for Importers

Importers claiming this exemption must submit the following documents to BIS within seven days of clearance of the consignment:

  • Copy of the Purchase Order.
  • Copy of the Bill of Lading.
  • Copy of the Bill of Entry.
  • Other relevant supporting documents.

All documents must be submitted on the importer's official letterhead and duly signed by its authorised signatory.

Exemption Timeline: The Three Dates That Matter

Importers must meet all three prescribed dates to qualify for the conditional exemption under the Furniture QCO Third Amendment Order, 2026.

StepRequired Document or ActionApplicable Deadline
1Purchase Order placed12 August 2026
2Bill of Lading issued30 November 2026
3Bill of Entry issued31 December 2026
4Documents submitted to BISWithin 7 days of consignment clearance

Important: The notification uses the word "and" when specifying the three date-based conditions. This means all three conditions must be satisfied for an import to qualify for the exemption. Meeting only one or two of these deadlines is not sufficient.

Who Is Affected From Furniture QCO Third Amendment Order? Eligibility Guide

The wording of the Furniture QCO Third Amendment Order, 2026 specifically concerns importers of furniture goods or articles. The following table provides a practical eligibility check based on the three conditions mentioned in the notification.

Importer's SituationWhat the Order Means
Purchase Order on or before 12 August 2026, Bill of Lading on or before 30 November 2026, and Bill of Entry on or before 31 December 2026The exemption may apply, subject to submitting the required documents to BIS within seven days of clearance.
Purchase Order placed after 12 August 2026The purchase order condition is not satisfied.
Bill of Lading issued after 30 November 2026The Bill of Lading condition is not satisfied.
Bill of Entry issued after 31 December 2026The Bill of Entry condition is not satisfied.

The amendment does not provide a list of individual furniture products or specify their technical standards. To identify the products covered under the Furniture QCO 2025, importers should refer to the principal Order (S.O. 801(E)) and its subsequent amendments.

Benefits of the Amendment for Importers

The Furniture QCO Third Amendment Order, 2026 provides greater clarity for importers dealing with shipments placed before the specified cut-off date.

  • Clear Cut-off Dates: A single new proviso replaces the earlier seventh and eighth provisos, providing three specific dates for determining eligibility for the import exemption.
  • Relief for Earlier Purchase Orders: Importers with purchase orders placed on or before 12 August 2026 may qualify for the exemption if the prescribed shipping and customs deadlines are also met.
  • Time for Shipment and Customs Clearance: The amendment specifies 30 November 2026 as the Bill of Lading deadline and 31 December 2026 as the Bill of Entry deadline.
  • Defined Reporting Requirement: The seven-day submission window after consignment clearance establishes a clear deadline for providing the required documents to BIS.

Documents Required After Clearance Furniture QCO Third Amendment Order

Importers claiming the exemption must submit the documents specified in the amendment to BIS within the prescribed period.

DocumentRequirement
Purchase OrderCopy showing that the order was placed on or before 12 August 2026.
Bill of LadingCopy issued on or before 30 November 2026.
Bill of EntryCopy issued on or before 31 December 2026.
Other Supporting DocumentsAdditional relevant documents as required. The notification does not specify an exhaustive list.
Covering SubmissionDocuments must be submitted on the importer's letterhead and signed by the authorised signatory.
Documents Required Under Furniture QCO third amendment order

Important: The notification does not specify a particular online portal, email address or prescribed submission format for sending these documents to BIS. Importers should confirm the applicable submission channel with BIS before the seven-day deadline expires.

Step-by-Step Process for Importers Furniture QCO Third Amendment Order

Importers should follow these steps to claim the conditional exemption under the Furniture QCO Third Amendment Order, 2026:

  1. Verify the Purchase Order Date: Check that the purchase order was placed on or before 12 August 2026.
  2. Check the Bill of Lading Date: Ensure that the Bill of Lading was issued on or before 30 November 2026.
  3. Verify the Bill of Entry Date: Confirm that the Bill of Entry was issued on or before 31 December 2026.
  4. Record the Clearance Date: Note the date on which the consignment is cleared, as the seven-day reporting period starts from this date.
  5. Prepare the Required Documents: Collect copies of the purchase order, Bill of Lading, Bill of Entry and other supporting documents.
  6. Obtain Authorized Signature: Arrange for the documents to be submitted on the importer's official letterhead and signed by the authorized signatory.
  7. Submit Documents to BIS: Send the complete documentation to BIS within seven days of consignment clearance and retain proof of submission.
Process For Furniture Third Amendment Order

Fees, Validity and Renewal: What Does the Order Say?

The Furniture QCO Third Amendment Order, 2026 introduces a conditional import exemption and specifies the related reporting requirements. It does not establish a separate fee or renewal process for this exemption.

TopicPosition Under S.O. 5950(E)
FeesThe amendment does not prescribe a separate fee for claiming the exemption or submitting the required documents.
Validity of ExemptionEligibility depends on meeting the three specified dates and the reporting requirement, rather than a fixed period of years.
RenewalRenewal is not applicable to this conditional import exemption because its eligibility conditions are based on fixed dates.

BIS Certification Validity: Importers and manufacturers who separately require BIS certification for furniture products should understand that the validity of a BIS licence is different from the import exemption introduced by this amendment.

An internal reference indicates a five-year BIS license validity under an amendment to the BIS Conformity Assessment Regulations effective February 2026. However, this information is not specified in S.O. 5950(E) and should be verified against the current BIS guidelines applicable to the relevant furniture certification scheme before publication.

Note: BIS licence fees and renewal timelines are not covered by this amendment. Businesses should refer to the official BIS portal for the latest applicable information.

What This Amendment Does Not Do

The Furniture QCO Third Amendment Order, 2026 introduces a specific import exemption but does not change every aspect of the existing Furniture QCO 2025.

The amendment:

  • Does not provide a separate list of products covered under the Furniture QCO 2025.
  • Does not introduce any new technical standards or product testing requirements.
  • Does not prescribe a separate fee for the import exemption.
  • Does not extend the Bill of Lading deadline beyond 30 November 2026 or the Bill of Entry deadline beyond 31 December 2026.
  • Does not specify a particular online portal or email address for submitting the seven-day compliance report.

Common Mistakes to Avoid Furniture QCO Third Amendment Order

Importers should carefully follow the conditions of the amendment to avoid errors when claiming the exemption.

  • Assuming Automatic Exemption: Do not assume that every earlier furniture purchase order qualifies. All three prescribed date conditions must be satisfied.
  • Missing the Seven-Day Deadline: Submit the required documents to BIS within seven days of consignment clearance.
  • Ignoring Authorised Signatures: Ensure that the submission is duly signed by the importer's authorised signatory.
  • Using Incorrect Letterhead: Submit the required documents on the importer's official letterhead.
  • Treating the Dates as Alternatives: The notification connects the three conditions with the word "and", meaning all three must be fulfilled to qualify for the exemption.

Why Choose Silvereye Certifications?

Silvereye Certifications provides regulatory compliance support to manufacturers, importers and businesses dealing with Indian product certification requirements. Our team helps businesses understand applicable QCO provisions, documentation requirements and BIS compliance procedures.

For the Furniture QCO Third Amendment Order, 2026, we can assist importers with:

  • QCO Applicability Guidance: Understand whether your imported furniture products fall under the Furniture (Quality Control) Order, 2025.
  • Import Documentation Support: Review purchase orders, Bills of Lading, Bills of Entry and other supporting documents.
  • Exemption Eligibility Assessment: Help verify whether your shipment meets all three prescribed date-based conditions.
  • BIS Documentation Assistance: Guide you in preparing the required documents for submission to BIS within the seven-day clearance period.
  • Regulatory Compliance Support: Help businesses understand applicable BIS certification requirements and related amendments.

Our focus is on providing clear guidance, transparent communication and practical compliance support to help importers manage regulatory requirements with confidence.

Conclusion

The Furniture QCO Third Amendment Order, 2026 (S.O. 5950(E)) provides a conditional exemption for eligible furniture imports under the Furniture (Quality Control) Order, 2025. To qualify, importers must ensure that the Purchase Order was placed on or before 12 August 2026, the Bill of Lading was issued on or before 30 November 2026, and the Bill of Entry was issued on or before 31 December 2026.

Importers must also submit copies of the required documents, along with supporting records, to BIS within seven days of consignment clearance. Meeting all three deadlines and following the prescribed reporting conditions is essential to claim the exemption.

Businesses should review their import documentation and verify eligibility before relying on this provision. Silvereye Certifications can help importers understand the amendment, assess exemption eligibility and prepare the required compliance documentation.

Frequently Asked Questions

What is the Furniture QCO third amendment 2026?

It is S.O. 5950(E), published on 2 November 2026. It replaces the seventh and eighth provisos of paragraph 2 of the Furniture (Quality Control) Order, 2025 with a single new proviso on import exemptions.

When did it come into force?

From the date of its publication in the Official Gazette, 2 November 2026.

Which imports are exempt?

Imports where the purchase order was placed on or before 12 August 2026, the Bill of Lading is issued on or before 30 November 2026, and the Bill of Entry is issued on or before 31 December 2026.

Do all three dates have to be met?

The Order joins them with "and", so all three conditions are stated together.

What must the importer do after clearance?

Give BIS copies of the purchase order, Bill of Lading, Bill of Entry and other supporting documents within seven days of clearance.

In what form should the documents go to BIS?

On the importer's letterhead, duly signed by its authorised signatory.

Is there a fee for the exemption?

The Order mentions no fee.

Does the exemption expire?

It depends on fixed dates. The last date in the chain is the Bill of Entry date of 31 December 2026.

Who signed the notification?

Sumeet Kumar Jarangal, Joint Secretary, Government of India.

Where can I read the original notification?

In The Gazette of India, Extraordinary, Part II, Section 3(ii), No. 5718, dated 2 November 2026 (CG-DL-E-02112026-277585).

Which earlier notifications amended the Furniture QCO?

S.O. 774(E) of 12 February 2026 and S.O. 1125(E) of 2 March 2026. The principal Order is S.O. 801(E) of 13 February 2025.

Where do I get help with furniture BIS compliance?

 A BIS compliance consultant can check your dates and documents. See the next section.

Jyoti Sharma

Jyoti Sharma

Jyoti Sharma is a Digital Marketing Executive at Silvereye Certifications with expertise in SEO, WordPress, AI tools, and certification & compliance industry marketing solutions.

More About Our Company

Client Satisfy into Success Stories